Leading 10 common forklift accidents ， forklift operation should pay attention to these matters ！.
Leading 10 common forklift accidents ， forklift operation should pay attention to these matters ！.
Blog Article
Don't undervalue the forklift at work. If the procedure is not good, there will be serious accidents in minutes, and there are many accidents including forklifts.
Instance 1: The forklift cargo blocked the chauffeur's view, and the person in front might not be located, resulting in a rolling mishap.
Instance 2: In order to maintain the balance of the forklift when raising heavy items, the workers utilized their body weight as the weight, which nearly created casualties.
Instance 3: The size of the forklift cargo surpasses the permitted width of the path and holds on the roadside rack, which virtually causes an crash.
Case 4: Forklift is speeding up and surrender throughout a turn.
Situation 5: The forklift driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift raises the employees unlawfully, the forklift motorist does not use the safety belt, the forklift lifter falls and the driver is crushed when the forklift surrender.
Case 7: The forklift driver did not put on a safety belt and dropped from the automobile when it rolled over and was crushed.
Forklift procedure need to take notice of these issues ：.
Begin.
1. Before beginning, observe the environments, and after verifying that there are no obstacles that prevent the safety of driving, honk the horn first and then begin.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) gauge should be risk-free prior to starting.
3. When the forklift begins with a lots, the vehicle driver ought to initially verify that the lots is steady and dependable.
4. The beginning must be sluggish and consistent.
Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the mast ought to be slanted backwards. .
2. Do not raise the fork too expensive when driving. When getting in and leaving the job website or while driving, beware that there will be no challenges in the sky. When the tons is taking a trip, the fork has to not be raised expensive, which will certainly impact the stability of the forklift. .
3. After discharging, the fork ought to be lowered to the normal driving setting prior to driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be provided first. High-speed sharp turns are restricted. High-speed sharp turns will certainly trigger the automobile to lose side stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the flame and slide, and it is forbidden to brake instantly while driving with tons unless there are unique circumstances.
6. When the forklift is running, it must comply with the web traffic rules in the manufacturing facility and must maintain a certain safety and security distance from the automobile in front. .
7. When the forklift is running, the tons must remain in the lowest position that does not prevent the driving, and the gantry must be effectively slanted back. The tons shall not be elevated other than when piling or loading. .
8. The elevation of the load need to not block the motorist's sight. In special conditions, when the product influences the forward vision, drive at a low speed when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The safe driving rate of the forklift in the factory location is 5 km/h, and it has to drive safely at a low speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is forbidden for employees to depend on the fork to hold things and play a balancing function. .
12. If issues are discovered, they will be fixed and reported in a timely fashion, and they will certainly never ever operate with health problems or hide them.
filling and dumping.
1. When fork-loading items, the range in between both forks ought to be readjusted as required to make the lots of the two forks balanced and not manipulated, and one side of the product ought to be against the rack. .
2. It is forbidden to collaborate with a single fork or utilize a fork top or pull. In special circumstances, safety and security warning signs need to be set up to advise surrounding pedestrians. .
3. In the process of loading and unloading things, the forklift needs to be braked with the brake. .
4. The speed of the vehicle ought to be sluggish and stable. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the tons, and it should be kept in mind that the fork idea must not touch other products or Stand-on Electric Pallet Stacker things. The load must be supported with very little back tilt of the gantry to make sure that the lots does not glide in reverse. The pole can be tilted onward somewhat when the lots is lowered to enable very easy placement of the load and removal of the forks. .
6. It is restricted to fork products at broadband and collide with hard things with the fork head. .
7. When the forklift is working, it is prohibited for people to loaf the fork, so as to Electric Forklift Truck for Warehouse prevent the collapse of the goods and injure individuals. .
8. Overwhelming is banned, and it is forbidden to utilize forks to raise personnel to participate in high-altitude operations to stay clear of high-altitude falling mishaps. .
9. It is not permitted to utilize the brake inertia to slide, put, round or roll things. .
10. It is not allowed to make use of forks to choose, turn pallet dump.
Leaving .
1. It is forbidden to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you should discharge the goods or reduced the fork structure.
2. Draw the parking brake handle to dead or depress the parking brake switch.
3. The engine is switched off and the power is removed. (Except for special circumstances, such as the chauffeur does not leave the vehicle's view and does not go beyond 1 min).
4. Remove the key. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the look needs to be checked, and fuel, lubing oil and cooling water should be added.
2. Check the safety and security efficiency of beginning, running and stopping.
3. Check whether the lights and horn signals are full and efficient.
4. Throughout the procedure of the forklift, check whether the stress and temperature are typical.
5. After the forklift is running, the exterior leakage needs to additionally be examined and the seals ought to be changed in time.
Forklift Safety Operation Specifications.
1. You have to inspect prior to leaving the automobile;.
2. When you experience someone in front of you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the cargo should be 0.3 m ~ 0.4 m above the ground;.
5. The transforming should not be as well sharp to avoid the propensity of " totally free turning";.
6. Running up and down the slope should be slow-moving and uniform, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the vehicle needs to be driven in reverse when worsening;.
8. When the forklift workers carry the goods and move forward, if they run into huge or heavy items and go to the vehicle driver's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be adhered to in the operation.
1. Single fork procedure is not permitted.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by handing over the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not enabled to make use of inertia force to grab the goods.
6. It is not enabled to use stopping pressure to exile round or easy-to-roll things.
7. It is not permitted to bring individuals to service the pallet or fork, and it is purely prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Parking is not permitted under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the contrary side of the area with the very same size as the obstacle must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844